PCLK_POL=Val_0, ROW_ROUNDUP=Val_0, VSYNC_EN=Val_0, MIPI_CSI=Val_0, CODE10ON8=Val_0, MSB=Val_0, VSYNC_POL=Val_0, DATA_MODE=Val_0, WAIT_VSYNC=Val_0, HSYNC_POL=Val_0, DATA_MASK=Val_0, CSI_HALT_EN=Val_0
Camera Configuration Register
| MIPI_CSI | Select video data source. NOTE: This register field is not functional for LPCPI. 0 (Val_0): Select video data from parallel camera interface 1 (Val_1): Select video data from MIPI CSI interface |
| CSI_HALT_EN | Enable MIPI CSI controller halt function when FIFO is almost full. NOTE: This register field is not functional for LPCPI. 0 (Val_0): Disable CSI IPI halt function 1 (Val_1): Enable CSI IPI halt function |
| WAIT_VSYNC | Capture video frame on the rising edge of VSYNC. 0 (Val_0): Start video capture without waiting for VSYNC 1 (Val_1): Start video capture on rising edge of VSYNC |
| VSYNC_EN | Capture data when VSYNC is high. 0 (Val_0): Capture data regardless of VSYNC status 1 (Val_1): Capture data when VSYNC is high |
| ROW_ROUNDUP | Round up pixel data to 64-bit at the end of each row. 0 (Val_0): Not round up 1 (Val_1): Round up pixel data to 64-bit at the end of each row |
| PCLK_POL | Set camera PIXEL_CLK polarity. 0 (Val_0): Not invert external camera PIXEL_CLK 1 (Val_1): Invert external camera PIXEL_CLK |
| HSYNC_POL | Set camera HSYNC polarity. 0 (Val_0): Not invert HSYNC input 1 (Val_1): Invert HSYNC input |
| VSYNC_POL | Set camera VSYNC polarity. 0 (Val_0): Not invert VSYNC input 1 (Val_1): Invert VSYNC input |
| DATA_MODE | Select video data mode. 0 (Val_0): 1-bit 1 (Val_1): 2-bit 2 (Val_2): 4-bit 3 (Val_3): 8-bit 4 (Val_4): 16-bit (NOTE: This value is not valid for LPCPI) |
| MSB | Select MSB/LSB Valid only when [DATA_MODE] field is set to 1-/2-/4-/8-bit. 0 (Val_0): LSB 1 (Val_1): MSB |
| CODE10ON8 | Special coding: transfer 10-bit coding over 8-bit data bus. Valid only when [DATA_MODE] field is set to 8-bit. 0 (Val_0): Disable special 10-bit coding 1 (Val_1): Enable special 10-bit coding |
| DATA_MASK | Select camera data mask. Valid only when [DATA_MODE] field is set to 16-bit. NOTE: This register field is not functional for LPCPI. 0 (Val_0): 16-bit 1 (Val_1): 10-bit 2 (Val_2): 12-bit 3 (Val_3): 14-bit |